Products Safety-Flammable Gases Safety-Toxic Gases Portable Gas Detectors Buildings Services Indoor Air Quality Outdoor & Environment Sewage & Landfill Fire Detection		Fire Detection 　 SenseWare - T229/2   The T-229/2 Flame detector Test Lamp activates UV, IR and UV/IR Flame detectors that detect at 185-235 nm UV and 4.4 μ IR radiation. For UV only detectors the maximum distance is up to 10 meters (32 ft). The typical test range for IR and UV/IR detectors is up to 2.5 meters (8 ft). Like most IR Flame detectors, the IR-44/10 and the IR part of the UV/IR-229/1(2) have an extra alarm criterion through analyzing the flicker frequency of a fire.   Honeywell - Searchflame 16   The Search flame 16 is an optical flame detector certified for use in designated hazardous areas. Using both ultraviolet and infrared radiation this well established technique has been enhanced with the addition of visible radiation detection, taking false alarm immunity to a new level. With the widest field of view offered by any detector, integral self test and storage of fire event data, all as standard, makes the SF16 the ultimate in UV/IR flame detection.   Spark Detector - Sense-Ware IR-800/1   The Infrared Spark Detector IR-800/1 detects small glowing sparks in air ducts or other closed conveyer systems. The detector operates at 800 nm (700–1000) which is the Near Infrared and very close to the visible range. Sparks or Embers hotter than 8000C (14720F) can be detected within 1 msec. The IR-800/1 should be installed in dark applications in order to see the spark or ember. Just like the human eye the unit needs to have a contrast between the object and the background. In daylight or under artificial light conditions the detector can’t operate.